Tutorial Start by tapping on Next button.
1. Click on 'Next' button to Add IC-74LS04 (NOT Gate) Click on 'Next' button to Add IC-74LS04 (NOT Gate)
2. Click on 'Next' button to Add IC-74LS08 (AND Gate) Click on 'Next' button to Add IC-74LS08 (AND Gate)
3. Click on 'Next' button to Add IC-74LS02 (NOR Gate) Click on 'Next' button to Add IC-74LS02 (NOR Gate)
4. Click on 'Next' button to Connect GND and VCC of both IC Click on 'Next' button to Connect GND and VCC of both IC
5. Click on 'Next' button to Connect Input-A to Pin-1 of NOT Gate Click on 'Next' button to Connect Input-A to Pin-1 of NOT Gate
6. Click on 'Next' button to Connect Input-B to Pin-3 of NOT Gate Click on 'Next' button to Connect Input-B to Pin-3 of NOT Gate
7. Click on 'Next' button to Connect Output of NOT Gate-1 to Pin-1 of AND Gate-1 Click on 'Next' button to Connect Output of NOT Gate-1 to Pin-1 of AND Gate-1
8. Click on 'Next' button to Connect Output of NOT Gate-2 to Pin-2 of AND Gate-2 Click on 'Next' button to Connect Output of NOT Gate-2 to Pin-2 of AND Gate-2
9. Click on 'Next' button to Connect Input-A to Pin-1 of AND Gate-2 Click on 'Next' button to Connect Input-A to Pin-1 of AND Gate-2
10. Click on 'Next' button to Connect Input-B to Pin-2 of AND Gate-1 Click on 'Next' button to Connect Input-B to Pin-2 of AND Gate-1
11. Click on 'Next' button to Connect Output of AND Gate-1 to Pin-1 of NOR Gate Click on 'Next' button to Connect Output of AND Gate-1 to Pin-1 of NOR Gate
12. Click on 'Next' button to Connect Output of AND Gate-2 to Pin-2 of NOR Gate Click on 'Next' button to Connect Output of AND Gate-2 to Pin-2 of NOR Gate
13. Click on 'Next' button to Connect Output of NOR Gate to output port as 'A=B' Click on 'Next' button to Connect Output of NOR Gate to output port as 'A=B'
14. Click on 'Next' button to Connect Output of AND Gate-1 to output port as 'A<B' Click on 'Next' button to Connect Output of AND Gate-1 to output port as 'A<B'
15. Click on 'Next' button to Connect Output of AND Gate-2 to output port as 'A>B' Click on 'Next' button to Connect Output of AND Gate-2 to output port as 'A>B'
Done You have completed the tutorial. Power on the circuit to test the behavior.
