Full adder (Basic Gates)

SUMEDH
SUMEDH 1NT19CS195
Created on Feb 21, 2021 0 0 3
Full adder (Basic Gates)
100%

Integrated Circuits Used

Procedure

  1. Add IC 74LS86 into ICBase-2 (74LS86).
  2. Add IC 74LS08 into ICBase-3 (74LS08).
  3. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS86).
  4. Connect Pin-20 (VCC) of ICBase-3 (74LS08) to VCC Port.
  5. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS08).
  6. Connect Pin-7 (Ground) of ICBase-2 (74LS86) to GND Port.
  7. Connect Pin-1 (Input) of ICBase-2 (74LS86) to Input-2.
  8. Connect Pin-2 (Input) of ICBase-2 (74LS86) to Input-1.
  9. Connect Pin-4 (Input) of ICBase-2 (74LS86) to Pin-3 (Output) of ICBase-2 (74LS86).
  10. Connect Input-0 to Pin-5 (Input) of ICBase-2 (74LS86).
  11. Connect Output-1 to Pin-6 (Output) of ICBase-2 (74LS86).
  12. Connect Pin-1 (Input) of ICBase-3 (74LS08) to Input-2.
  13. Connect Input-1 to Pin-2 (Input) of ICBase-3 (74LS08).
  14. Connect Pin-4 (Input) of ICBase-3 (74LS08) to Input-0.
  15. Connect Pin-5 (Input) of ICBase-3 (74LS08) to Pin-3 (Output) of ICBase-2 (74LS86).
  16. Connect Pin-2 (Input) of ICBase-4 (74LS32) to Pin-6 (Output) of ICBase-3 (74LS08).
  17. Connect Pin-1 (Input) of ICBase-4 (74LS32) to Pin-3 (Output) of ICBase-3 (74LS08).
  18. Connect VCC Port to Pin-20 (VCC) of ICBase-4 (74LS32).
  19. Connect GND Port to Pin-7 (Ground) of ICBase-4 (74LS32).
  20. Add IC 74LS32 into ICBase-4 (74LS32).
  21. Connect Output-0 to Pin-3 (Output) of ICBase-4 (74LS32).