FULL ADDER NAND

Aabhash
Aabhash Manandhar
Created on Dec 27, 2020 0 0 3
FULL ADDER NAND
100%

Integrated Circuits Used

Procedure

  1. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS32).
  2. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS08).
  3. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS86).
  4. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS08).
  5. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS32).
  6. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS86).
  7. Connect Input-15 to Pin-1 (Input) of ICBase-1 (74LS86).
  8. Connect Input-14 to Pin-2 (Input) of ICBase-1 (74LS86).
  9. Connect Pin-4 (Input) of ICBase-2 (74LS08) to Pin-3 (Output) of ICBase-1 (74LS86).
  10. Connect Pin-4 (Input) of ICBase-1 (74LS86) to Pin-3 (Output) of ICBase-1 (74LS86).
  11. Connect Input-13 to Pin-5 (Input) of ICBase-1 (74LS86).
  12. Connect Output-1 to Pin-6 (Output) of ICBase-1 (74LS86).
  13. Connect Input-14 to Pin-2 (Input) of ICBase-2 (74LS08).
  14. Connect Input-15 to Pin-1 (Input) of ICBase-2 (74LS08).
  15. Connect Pin-2 (Input) of ICBase-3 (74LS32) to Pin-3 (Output) of ICBase-2 (74LS08).
  16. Connect Input-13 to Pin-5 (Input) of ICBase-2 (74LS08).
  17. Connect Pin-1 (Input) of ICBase-3 (74LS32) to Pin-6 (Output) of ICBase-2 (74LS08).
  18. Connect Output-0 to Pin-3 (Output) of ICBase-3 (74LS32).
  19. Add IC 74LS86 into ICBase-1 (74LS86).
  20. Add IC 74LS32 into ICBase-3 (74LS32).
  21. Add IC 74LS08 into ICBase-2 (74LS08).