nmnm
100%

Integrated Circuits Used

Procedure

  1. Add IC 74LS90 into ICBase-1 (74LS90).
  2. Connect Clock port of 5Hz frequency to Pin-20 (Input) of ICBase-1 (74LS90).
  3. Connect Output-15 to Pin-18 (Output) of ICBase-1 (74LS90).
  4. Connect Output-12 to Pin-17 (Output) of ICBase-1 (74LS90).
  5. Connect GND Port to Pin-16 (Ground) of ICBase-1 (74LS90).
  6. Connect Output-14 to Pin-15 (Output) of ICBase-1 (74LS90).
  7. Connect Output-13 to Pin-14 (Output) of ICBase-1 (74LS90).
  8. Connect VCC Port to Pin-5 (VCC) of ICBase-1 (74LS90).
  9. Connect Pin-18 (Output) of ICBase-1 (74LS90) to Pin-1 (Input) of ICBase-1 (74LS90).
  10. Connect GND Port to Pin-2 (Input) of ICBase-1 (74LS90).
  11. Connect GND Port to Pin-6 (Input) of ICBase-1 (74LS90).
  12. Connect Seven segment display 2 to Pin-17 (Output) of ICBase-1 (74LS90).
  13. Connect Seven segment display 2 to Pin-14 (Output) of ICBase-1 (74LS90).
  14. Connect Seven segment display 2 to Pin-15 (Output) of ICBase-1 (74LS90).
  15. Connect Seven segment display 2 to Pin-18 (Output) of ICBase-1 (74LS90).
  16. Connect Seven segment display 2 to ICBase-1 (74LS90).
  17. Add IC 74LS08 into ICBase-2 (74LS08).
  18. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS08).
  19. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS08).