moore sequence detector

rangani
rangani roshini
Created on Dec 9, 2020 0 0 4
moore sequence detector
100%

Integrated Circuits Used

Procedure

  1. Connect Pin-2 (Input) of ICBase-2 (74LS74) to Input-7.
  2. Connect Pin-1 (Input) of ICBase-1 (74LS04) to Input-7.
  3. Connect Pin-1 (Input) of ICBase-3 (74LS08) to Pin-2 (Output) of ICBase-1 (74LS04).
  4. Connect Pin-2 (Input) of ICBase-3 (74LS08) to Pin-5 (Output) of ICBase-2 (74LS74).
  5. Connect Pin-4 (Input) of ICBase-3 (74LS08) to Pin-6 (Output) of ICBase-2 (74LS74).
  6. Connect Pin-5 (Input) of ICBase-3 (74LS08) to Input-7.
  7. Connect Pin-16 (Input) of ICBase-3 (74LS08) to Pin-15 (Output) of ICBase-2 (74LS74).
  8. Connect Pin-15 (Input) of ICBase-3 (74LS08) to Pin-6 (Output) of ICBase-3 (74LS08).
  9. Connect Pin-1 (Input) of ICBase-4 (74LS32) to Pin-3 (Output) of ICBase-3 (74LS08).
  10. Connect Pin-2 (Input) of ICBase-4 (74LS32) to Pin-14 (Output) of ICBase-3 (74LS08).
  11. Connect Pin-3 (Output) of ICBase-4 (74LS32) to Pin-18 (Input) of ICBase-2 (74LS74).
  12. Connect Manual clock Port to Pin-3 (Input) of ICBase-2 (74LS74).
  13. Connect Manual clock Port to Pin-17 (Input) of ICBase-2 (74LS74).
  14. Connect VCC Port to Pin-1 (Input) of ICBase-2 (74LS74).
  15. Connect VCC Port to Pin-4 (Input) of ICBase-2 (74LS74).
  16. Connect VCC Port to Pin-16 (Input) of ICBase-2 (74LS74).
  17. Connect Pin-19 (Input) of ICBase-2 (74LS74) to VCC Port.
  18. Connect Pin-18 (Input) of ICBase-3 (74LS08) to Pin-5 (Output) of ICBase-2 (74LS74).
  19. Connect Pin-19 (Input) of ICBase-3 (74LS08) to Pin-15 (Output) of ICBase-2 (74LS74).
  20. Connect Output-6 to Pin-17 (Output) of ICBase-3 (74LS08).
  21. Add IC 74LS04 into ICBase-1 (74LS04).
  22. Add IC 74LS08 into ICBase-3 (74LS08).
  23. Add IC 74LS32 into ICBase-4 (74LS32).
  24. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS04).
  25. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS08).
  26. Connect VCC Port to Pin-20 (VCC) of ICBase-4 (74LS32).
  27. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS04).
  28. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS08).
  29. Connect GND Port to Pin-7 (Ground) of ICBase-4 (74LS32).
  30. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS74).
  31. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS74).
  32. Add IC 74LS74 into ICBase-2 (74LS74).
  33. Connect VCC Port to ICBase-2 (74LS74).