MOD 6

Satvik
Satvik G S
Created on Apr 13, 2021 0 0 2
MOD 6
100%

Integrated Circuits Used

Procedure

  1. Connect GND Port to Pin-17 (Ground) of ICBase-1 (74LS76).
  2. Add IC 74LS76 into ICBase-1 (74LS76).
  3. Connect VCC Port to Pin-5 (VCC) of ICBase-1 (74LS76).
  4. Connect Pin-1 (Input) of ICBase-1 (74LS76) to Manual clock Port.
  5. Connect Manual clock Port to Pin-6 (Input) of ICBase-1 (74LS76).
  6. Connect VCC Port to Pin-2 (Input) of ICBase-1 (74LS76).
  7. Connect VCC Port to Pin-3 (Input) of ICBase-1 (74LS76).
  8. Connect VCC Port to Pin-7 (Input) of ICBase-1 (74LS76).
  9. Connect Pin-8 (Input) of ICBase-1 (74LS76) to VCC Port.
  10. Add IC 74LS76 into ICBase-2 (74LS76).
  11. Connect VCC Port to Pin-2 (Input) of ICBase-2 (74LS76).
  12. Connect VCC Port to Pin-3 (Input) of ICBase-2 (74LS76).
  13. Connect VCC Port to Pin-5 (VCC) of ICBase-2 (74LS76).
  14. Connect GND Port to Pin-13 (Input) of ICBase-2 (74LS76).
  15. Connect Manual clock Port to ICBase-1 (74LS76).
  16. Connect VCC Port to ICBase-1 (74LS76).
  17. Connect Manual clock Port to ICBase-2 (74LS76).
  18. Connect Pin-1 (Input) of ICBase-2 (74LS76) to Manual clock Port.
  19. Connect Pin-1 (Input) of ICBase-3 (74LS32) to Pin-14 (Output) of ICBase-1 (74LS76).
  20. Connect Pin-2 (Input) of ICBase-3 (74LS32) to Pin-18 (Output) of ICBase-2 (74LS76).
  21. Connect Pin-3 (Output) of ICBase-3 (74LS32) to Pin-4 (Input) of ICBase-1 (74LS76).
  22. Connect VCC Port to Pin-20 (Input) of ICBase-1 (74LS76).
  23. Connect Pin-14 (Output) of ICBase-1 (74LS76) to ICBase-3 (74LS32).
  24. Add IC 74LS32 into ICBase-3 (74LS32).