AND Gate

Akshat
Akshat Shah
Created on Dec 20, 2020 0 0 1
AND Gate
100%

Integrated Circuits Used

Procedure

  1. Add IC 74LS08 into ICBase-3 (74LS08).
  2. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS08).
  3. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS08).
  4. Connect Pin-1 (Input) of ICBase-3 (74LS08) to Input-0.
  5. Connect Pin-2 (Input) of ICBase-3 (74LS08) to Input-1.
  6. Connect Output-0 to Pin-3 (Output) of ICBase-3 (74LS08).
  7. Connect Pin-4 (Input) of ICBase-3 (74LS08) to Input-3.
  8. Connect Pin-5 (Input) of ICBase-3 (74LS08) to Input-4.
  9. Connect Output-2 to Pin-6 (Output) of ICBase-3 (74LS08).
  10. Connect Pin-19 (Input) of ICBase-3 (74LS08) to Input-7.
  11. Connect Pin-18 (Input) of ICBase-3 (74LS08) to Input-6.
  12. Connect Output-4 to Pin-17 (Output) of ICBase-3 (74LS08).
  13. Connect Pin-16 (Input) of ICBase-3 (74LS08) to Input-10.
  14. Connect Pin-15 (Input) of ICBase-3 (74LS08) to Input-9.
  15. Connect Output-6 to Pin-14 (Output) of ICBase-3 (74LS08).