T flip flop

1DA19CS033
1DA19CS033 CHANDRIKA S N
Created on Dec 8, 2020 undefined 0 undefined 0 undefined 2
T flip flop
100%

undefined Integrated Circuits Used

undefined Procedure

  1. Add IC 74LS00 into ICBase-1 (74LS00).
  2. Add IC 74LS10 into ICBase-2 (74LS10).
  3. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS00).
  4. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS10).
  5. Connect Input-9 to Pin-2 (Input) of ICBase-2 (74LS10).
  6. Connect Clock port of 5Hz frequency to Pin-19 (Input) of ICBase-2 (74LS10).
  7. Connect Clock port of 5Hz frequency to Pin-3 (Input) of ICBase-2 (74LS10).
  8. Connect Pin-1 (Input) of ICBase-1 (74LS00) to Pin-18 (Output) of ICBase-2 (74LS10).
  9. Connect Input-9 to Pin-4 (Input) of ICBase-2 (74LS10).
  10. Connect Pin-5 (Input) of ICBase-1 (74LS00) to Pin-6 (Output) of ICBase-2 (74LS10).
  11. Connect Pin-2 (Input) of ICBase-1 (74LS00) to Pin-6 (Output) of ICBase-1 (74LS00).
  12. Connect Pin-4 (Input) of ICBase-1 (74LS00) to Pin-3 (Output) of ICBase-1 (74LS00).
  13. Connect Output-11 to Pin-3 (Output) of ICBase-1 (74LS00).
  14. Connect Output-10 to Pin-6 (Output) of ICBase-1 (74LS00).
  15. Connect Pin-5 (Input) of ICBase-2 (74LS10) to Pin-3 (Output) of ICBase-1 (74LS00).
  16. Connect Pin-1 (Input) of ICBase-2 (74LS10) to Pin-6 (Output) of ICBase-1 (74LS00).
  17. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS10).
  18. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS00).