moore circuit 101

SWETA
SWETA LENA
Created on Dec 12, 2020 0 0 4
moore circuit 101
100%

Integrated Circuits Used

Procedure

  1. Connect Pin-15 (Output) of ICBase-4 (74LS74) to Pin-1 (Input) of ICBase-2 (74LS08).
  2. Connect Pin-2 (Output) of ICBase-3 (74LS04) to Pin-2 (Input) of ICBase-2 (74LS08).
  3. Connect Pin-1 (Input) of ICBase-5 (74LS32) to Pin-3 (Output) of ICBase-2 (74LS08).
  4. Connect Pin-5 (Output) of ICBase-4 (74LS74) to Pin-4 (Input) of ICBase-2 (74LS08).
  5. Connect Pin-14 (Output) of ICBase-4 (74LS74) to Pin-5 (Input) of ICBase-2 (74LS08).
  6. Connect Pin-15 (Input) of ICBase-2 (74LS08) to Pin-6 (Output) of ICBase-2 (74LS08).
  7. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS08).
  8. Connect Pin-2 (Input) of ICBase-5 (74LS32) to Pin-14 (Output) of ICBase-2 (74LS08).
  9. Connect Input-5 to Pin-16 (Input) of ICBase-2 (74LS08).
  10. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS08).
  11. Connect Output-1 to Pin-17 (Output) of ICBase-2 (74LS08).
  12. Connect Pin-5 (Output) of ICBase-4 (74LS74) to Pin-18 (Input) of ICBase-2 (74LS08).
  13. Connect Pin-15 (Output) of ICBase-4 (74LS74) to Pin-19 (Input) of ICBase-2 (74LS08).
  14. Connect Input-5 to Pin-1 (Input) of ICBase-3 (74LS04).
  15. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS04).
  16. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS04).
  17. Connect VCC Port to Pin-20 (VCC) of ICBase-4 (74LS74).
  18. Connect VCC Port to Pin-20 (VCC) of ICBase-5 (74LS32).
  19. Connect GND Port to Pin-7 (Ground) of ICBase-4 (74LS74).
  20. Connect GND Port to Pin-7 (Ground) of ICBase-5 (74LS32).
  21. Connect Input-1 to Pin-1 (Input) of ICBase-4 (74LS74).
  22. Connect Pin-3 (Output) of ICBase-5 (74LS32) to Pin-2 (Input) of ICBase-4 (74LS74).
  23. Connect Pin-4 (Input) of ICBase-4 (74LS74) to Input-2.
  24. Connect Input-1 to Pin-20 (VCC) of ICBase-4 (74LS74).
  25. Connect Pin-19 (Input) of ICBase-4 (74LS74) to Input-1.
  26. Connect Input-1 to Pin-16 (Input) of ICBase-4 (74LS74).
  27. Add IC 74LS04 into ICBase-3 (74LS04).
  28. Add IC 74LS08 into ICBase-2 (74LS08).
  29. Add IC 74LS32 into ICBase-5 (74LS32).
  30. Add IC 74LS74 into ICBase-4 (74LS74).
  31. Connect Pin-18 (Input) of ICBase-4 (74LS74) to Input-5.
  32. Connect Manual clock Port to Pin-3 (Input) of ICBase-4 (74LS74).
  33. Connect Manual clock Port to Pin-17 (Input) of ICBase-4 (74LS74).