design using mux

Shrutika
Shrutika Jadhav
Created on Dec 14, 2020 0 0 2
design using mux
100%

Integrated Circuits Used

Procedure

  1. Add IC 74LS04 into ICBase-2 (74LS04).
  2. Add IC 74LS151 into ICBase-1 (74LS151).
  3. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS04).
  4. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS151).
  5. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS04).
  6. Connect Input-12 to Pin-1 (Input) of ICBase-2 (74LS04).
  7. Connect GND Port to Pin-8 (Ground) of ICBase-1 (74LS151).
  8. Connect Pin-14 (Input) of ICBase-1 (74LS151) to Input-14.
  9. Connect Input-12 to Pin-3 (Input) of ICBase-1 (74LS151).
  10. Connect Input-12 to Pin-4 (Input) of ICBase-1 (74LS151).
  11. Connect Output-15 to Pin-5 (Output) of ICBase-1 (74LS151).
  12. Connect GND Port to Pin-1 (Input) of ICBase-1 (74LS151).
  13. Connect Input-15 to Pin-13 (Input) of ICBase-1 (74LS151).
  14. Connect Input-13 to Pin-15 (Input) of ICBase-1 (74LS151).
  15. Connect VCC Port to Pin-16 (Input) of ICBase-1 (74LS151).
  16. Connect VCC Port to Pin-17 (Input) of ICBase-1 (74LS151).
  17. Connect Input-12 to Pin-18 (Input) of ICBase-1 (74LS151).
  18. Connect GND Port to Pin-19 (Input) of ICBase-1 (74LS151).
  19. Connect Pin-2 (Output) of ICBase-2 (74LS04) to Pin-2 (Input) of ICBase-1 (74LS151).
  20. Connect GND Port to Pin-7 (Input) of ICBase-1 (74LS151).
  21. Connect Input-15 to ICBase-1 (74LS151).
  22. Connect Input-13 to ICBase-1 (74LS151).