Trainer Kit

Skand
Skand Tandon
• Created on Feb 24, 2021 • 0 • 0 • 2
Edit Circuit Copy Circuit Try Yourself
Trainer Kit
100%

Integrated Circuits Used

74LS83 74LS86

Procedure

  1. Connect Input-15 to ICBase-2 (74LS83).
  2. Connect Input-7 to Pin-17 (Input) of ICBase-2 (74LS83).
  3. Connect Pin-1 (Input) of ICBase-1 (74LS86) to Input-7.
  4. Connect Pin-4 (Input) of ICBase-1 (74LS86) to Input-7.
  5. Connect Pin-19 (Input) of ICBase-1 (74LS86) to Input-7.
  6. Connect Pin-16 (Input) of ICBase-1 (74LS86) to Input-7.
  7. Connect Input-3 to Pin-2 (Input) of ICBase-1 (74LS86).
  8. Connect Pin-20 (Input) of ICBase-2 (74LS83) to Pin-3 (Output) of ICBase-1 (74LS86).
  9. Connect Input-2 to Pin-5 (Input) of ICBase-1 (74LS86).
  10. Connect Pin-4 (Input) of ICBase-2 (74LS83) to Pin-6 (Output) of ICBase-1 (74LS86).
  11. Connect Input-1 to Pin-18 (Input) of ICBase-1 (74LS86).
  12. Connect Input-0 to Pin-15 (Input) of ICBase-1 (74LS86).
  13. Connect Pin-7 (Input) of ICBase-2 (74LS83) to Pin-17 (Output) of ICBase-1 (74LS86).
  14. Connect Pin-15 (Input) of ICBase-2 (74LS83) to Pin-14 (Output) of ICBase-1 (74LS86).
  15. Connect Pin-17 (Output) of ICBase-1 (74LS86) to ICBase-2 (74LS83).
  16. Add IC 74LS83 into ICBase-2 (74LS83).
  17. Add IC 74LS86 into ICBase-1 (74LS86).
  18. Connect VCC Port to Pin-5 (VCC) of ICBase-2 (74LS83).
  19. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS86).
  20. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS86).
  21. Connect Input-15 to Pin-1 (Input) of ICBase-2 (74LS83).
  22. Connect Input-14 to Pin-3 (Input) of ICBase-2 (74LS83).
  23. Connect Input-13 to Pin-8 (Input) of ICBase-2 (74LS83).
  24. Connect Input-12 to Pin-14 (Input) of ICBase-2 (74LS83).
  25. Connect Output-15 to Pin-18 (Output) of ICBase-2 (74LS83).
  26. Connect Output-3 to Pin-19 (Output) of ICBase-2 (74LS83).
  27. Connect Output-2 to Pin-2 (Output) of ICBase-2 (74LS83).
  28. Connect Output-1 to Pin-6 (Output) of ICBase-2 (74LS83).
  29. Connect Output-0 to Pin-13 (Output) of ICBase-2 (74LS83).
  30. Connect GND Port to Pin-16 (Ground) of ICBase-2 (74LS83).