FCASD Project

Harsh
Harsh
• Created on Apr 20, 2026 • 0 • 0 • 0
Edit Circuit Copy Circuit Try Yourself
FCASD Project
100%

Description

Biscuit Counter Using 3 bit Synchronous Up counter using 3 jk flip flops and an 2 input Ic 74LS08

Procedure

  1. Add IC 74LS76 into ICBase-1 (74LS76).
  2. Add IC 74LS76 into ICBase-2 (74LS76).
  3. Add IC 74LS08 into ICBase-3 (74LS08).
  4. Connect Pin-20 (VCC) of ICBase-3 (74LS08) to VCC Port.
  5. Connect Pin-3 (Input) of ICBase-2 (74LS76) to VCC Port.
  6. Connect Pin-5 (VCC) of ICBase-2 (74LS76) to VCC Port.
  7. Connect Pin-8 (Input) of ICBase-1 (74LS76) to VCC Port.
  8. Connect Pin-3 (Output) of ICBase-3 (74LS08) to Pin-4 (Input) of ICBase-2 (74LS76).
  9. Connect Pin-3 (Output) of ICBase-3 (74LS08) to Pin-20 (Input) of ICBase-2 (74LS76).
  10. Connect Pin-19 (Output) of ICBase-1 (74LS76) to Pin-1 (Input) of ICBase-3 (74LS08).
  11. Connect Pin-20 (Input) of ICBase-1 (74LS76) to VCC Port.
  12. Connect Pin-16 (Input) of ICBase-1 (74LS76) to Pin-19 (Output) of ICBase-1 (74LS76).
  13. Connect Pin-3 (Input) of ICBase-1 (74LS76) to VCC Port.
  14. Connect Pin-1 (Input) of ICBase-1 (74LS76) to Clock port of 5Hz frequency.
  15. Connect VCC Port to Pin-4 (Input) of ICBase-1 (74LS76).
  16. Connect VCC Port to Pin-5 (VCC) of ICBase-1 (74LS76).
  17. Connect Pin-6 (Input) of ICBase-1 (74LS76) to Clock port of 5Hz frequency.
  18. Connect Pin-7 (Input) of ICBase-1 (74LS76) to VCC Port.
  19. Connect Pin-2 (Input) of ICBase-1 (74LS76) to VCC Port.
  20. Connect Seven segment display 1 to Pin-19 (Output) of ICBase-1 (74LS76).
  21. Connect Pin-17 (Ground) of ICBase-1 (74LS76) to GND Port.
  22. Connect Seven segment display 1 to Pin-15 (Output) of ICBase-1 (74LS76).
  23. Connect Pin-19 (Output) of ICBase-1 (74LS76) to Pin-13 (Input) of ICBase-1 (74LS76).
  24. Connect Pin-1 (Input) of ICBase-2 (74LS76) to Clock port of 5Hz frequency.
  25. Connect Pin-2 (Input) of ICBase-2 (74LS76) to VCC Port.
  26. Connect Pin-17 (Ground) of ICBase-2 (74LS76) to GND Port.
  27. Connect Seven segment display 1 to Pin-19 (Output) of ICBase-2 (74LS76).
  28. Connect Pin-2 (Input) of ICBase-3 (74LS08) to Pin-15 (Output) of ICBase-1 (74LS76).
  29. Connect Pin-7 (Ground) of ICBase-3 (74LS08) to GND Port.