2Bit Up/Down Ripple Counter

Vaishnavi
Vaishnavi Gurav
Created on Dec 7, 2020 0 0 1
2Bit Up/Down Ripple Counter
100%

Integrated Circuits Used

Procedure

  1. Add IC 74LS76 into ICBase-1 (74LS76).
  2. Connect Clock port of 5Hz frequency to Pin-1 (Input) of ICBase-1 (74LS76).
  3. Connect VCC Port to Pin-2 (Input) of ICBase-1 (74LS76).
  4. Connect VCC Port to Pin-4 (Input) of ICBase-1 (74LS76).
  5. Connect VCC Port to Pin-5 (VCC) of ICBase-1 (74LS76).
  6. Connect VCC Port to Pin-7 (Input) of ICBase-1 (74LS76).
  7. Connect VCC Port to Pin-13 (Input) of ICBase-1 (74LS76).
  8. Connect VCC Port to Pin-16 (Input) of ICBase-1 (74LS76).
  9. Connect VCC Port to Pin-20 (Input) of ICBase-1 (74LS76).
  10. Connect Output-0 to Pin-19 (Output) of ICBase-1 (74LS76).
  11. Connect Output-1 to Pin-15 (Output) of ICBase-1 (74LS76).
  12. Connect Pin-19 (Output) of ICBase-1 (74LS76) to Pin-6 (Input) of ICBase-1 (74LS76).
  13. Connect Input-0 to Pin-3 (Input) of ICBase-1 (74LS76).
  14. Connect Input-0 to Pin-8 (Input) of ICBase-1 (74LS76).
  15. Connect GND Port to Pin-17 (Ground) of ICBase-1 (74LS76).