and, or, not ; 1st week

sude
sude
• Created on Sep 30, 2025 • 0 • 0 • 0
Edit Circuit Copy Circuit Try Yourself
and, or, not ; 1st week
100%

Procedure

  1. Add IC 74LS08 into ICBase-1 (74LS08).
  2. Add IC 74LS32 into ICBase-2 (74LS32).
  3. Add IC 74LS04 into ICBase-3 (74LS04).
  4. Connect Pin-1 (Input) of ICBase-1 (74LS08) to Input-14.
  5. Connect Pin-2 (Input) of ICBase-1 (74LS08) to Input-13.
  6. Connect Pin-7 (Ground) of ICBase-1 (74LS08) to GND Port.
  7. Connect Pin-20 (VCC) of ICBase-1 (74LS08) to VCC Port.
  8. Connect Output-12 to Pin-3 (Output) of ICBase-1 (74LS08).
  9. Connect Pin-1 (Input) of ICBase-3 (74LS04) to Input-14.
  10. Connect Pin-19 (Input) of ICBase-1 (74LS08) to Pin-2 (Output) of ICBase-3 (74LS04).
  11. Connect Pin-18 (Input) of ICBase-1 (74LS08) to Input-12.
  12. Connect Output-10 to Pin-17 (Output) of ICBase-1 (74LS08).
  13. Connect Pin-1 (Input) of ICBase-2 (74LS32) to Pin-17 (Output) of ICBase-1 (74LS08).
  14. Connect Pin-2 (Input) of ICBase-2 (74LS32) to Pin-3 (Output) of ICBase-1 (74LS08).
  15. Connect Output-5 to Pin-3 (Output) of ICBase-2 (74LS32).
  16. Connect Pin-20 (VCC) of ICBase-2 (74LS32) to VCC Port.
  17. Connect Pin-20 (VCC) of ICBase-3 (74LS04) to VCC Port.
  18. Connect Pin-7 (Ground) of ICBase-2 (74LS32) to GND Port.
  19. Connect Pin-7 (Ground) of ICBase-3 (74LS04) to GND Port.