D type FF. 4in 1 NAND and 1 NOT (1inp& 1outp)

Samruddh
Samruddh Kalal
• Created on Nov 18, 2025 • 0 • 0 • 0
Edit Circuit Copy Circuit Try Yourself
D type FF. 4in 1 NAND and 1 NOT (1inp& 1outp)
100%

Procedure

  1. Connect Pin-7 (Ground) of ICBase-1 (74LS00) to GND Port.
  2. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS04).
  3. Connect Pin-20 (VCC) of ICBase-2 (74LS04) to VCC Port.
  4. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS00).
  5. Add IC 74LS00 into ICBase-1 (74LS00).
  6. Connect Pin-1 (Input) of ICBase-1 (74LS00) to Input-0.
  7. Connect Input-0 to Pin-1 (Input) of ICBase-2 (74LS04).
  8. Add IC 74LS04 into ICBase-2 (74LS04).
  9. Connect Pin-4 (Input) of ICBase-1 (74LS00) to Pin-2 (Output) of ICBase-2 (74LS04).
  10. Connect Pin-2 (Input) of ICBase-1 (74LS00) to Clock port of 1Hz frequency.
  11. Connect Clock port of 1Hz frequency to Pin-5 (Input) of ICBase-1 (74LS00).
  12. Connect Pin-3 (Output) of ICBase-1 (74LS00) to Pin-19 (Input) of ICBase-1 (74LS00).
  13. Connect Pin-16 (Input) of ICBase-1 (74LS00) to Pin-6 (Output) of ICBase-1 (74LS00).
  14. Connect Pin-18 (Input) of ICBase-1 (74LS00) to Pin-14 (Output) of ICBase-1 (74LS00).
  15. Connect Pin-17 (Output) of ICBase-1 (74LS00) to Pin-15 (Input) of ICBase-1 (74LS00).
  16. Connect Output-0 to Pin-17 (Output) of ICBase-1 (74LS00).