Seat belt warning system using AND & NOT gates

Sanvi
Sanvi Chopra
• Created on Apr 13, 2025 • 0 • 0 • 2
Edit Circuit Copy Circuit Try Yourself
Seat belt warning system using AND & NOT gates
100%

Integrated Circuits Used

74LS08 74LS04

Procedure

  1. Add IC 74LS08 into ICBase-3 (74LS08).
  2. Add IC 74LS04 into ICBase-2 (74LS04).
  3. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS04).
  4. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS08).
  5. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS04).
  6. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS08).
  7. Connect Input-14 to Pin-1 (Input) of ICBase-2 (74LS04).
  8. Connect Input-15 to Pin-1 (Input) of ICBase-3 (74LS08).
  9. Connect Pin-2 (Output) of ICBase-2 (74LS04) to Pin-2 (Input) of ICBase-3 (74LS08).
  10. Connect Pin-4 (Input) of ICBase-3 (74LS08) to Pin-3 (Output) of ICBase-3 (74LS08).
  11. Connect Input-13 to Pin-5 (Input) of ICBase-3 (74LS08).
  12. Connect Output-6 to Pin-6 (Output) of ICBase-3 (74LS08).
  13. Connect Pin-2 (Input) of ICBase-3 (74LS08) to ICBase-2 (74LS04).