Half Adder NAND

Abhiram
Abhiram AP
• Created on Jan 5, 2025 • 0 • 0 • 1
Edit Circuit Copy Circuit Try Yourself
Half Adder NAND
100%

Integrated Circuits Used

74LS00

Procedure

  1. Add IC 74LS00 into ICBase-1 (74LS00).
  2. Connect Pin-1 (Input) of ICBase-1 (74LS00) to Input-15.
  3. Connect Pin-2 (Input) of ICBase-1 (74LS00) to Input-14.
  4. Connect Pin-20 (VCC) of ICBase-1 (74LS00) to VCC Port.
  5. Connect Pin-7 (Ground) of ICBase-1 (74LS00) to GND Port.
  6. Connect Pin-4 (Input) of ICBase-1 (74LS00) to Input-15.
  7. Connect Pin-5 (Input) of ICBase-1 (74LS00) to Pin-3 (Output) of ICBase-1 (74LS00).
  8. Connect Pin-19 (Input) of ICBase-1 (74LS00) to Input-14.
  9. Connect Pin-18 (Input) of ICBase-1 (74LS00) to Pin-3 (Output) of ICBase-1 (74LS00).
  10. Connect Pin-15 (Input) of ICBase-1 (74LS00) to Pin-6 (Output) of ICBase-1 (74LS00).
  11. Connect Pin-16 (Input) of ICBase-1 (74LS00) to Pin-17 (Output) of ICBase-1 (74LS00).
  12. Connect Output-9 to Pin-14 (Output) of ICBase-1 (74LS00).
  13. Add IC 74LS00 into ICBase-2 (74LS00).
  14. Connect Pin-7 (Ground) of ICBase-2 (74LS00) to GND Port.
  15. Connect Pin-20 (VCC) of ICBase-2 (74LS00) to VCC Port.
  16. Connect Pin-1 (Input) of ICBase-2 (74LS00) to Pin-3 (Output) of ICBase-1 (74LS00).
  17. Connect Pin-2 (Input) of ICBase-2 (74LS00) to Pin-3 (Output) of ICBase-1 (74LS00).
  18. Connect Output-8 to Pin-3 (Output) of ICBase-2 (74LS00).
  19. Connect GND Port to ICBase-1 (74LS00).