mod 17 counter using 7490

Narender
Narender Dotasara
• Created on Dec 18, 2024 • 0 • 0 • 2
Edit Circuit Copy Circuit Try Yourself
mod 17 counter using 7490
100%

Integrated Circuits Used

74LS90 74LS08

Procedure

  1. Add IC 74LS90 into ICBase-1 (74LS90).
  2. Add IC 74LS90 into ICBase-2 (74LS90).
  3. Connect Pin-1 (Input) of ICBase-2 (74LS90) to Pin-18 (Output) of ICBase-2 (74LS90).
  4. Connect Pin-20 (Input) of ICBase-1 (74LS90) to Pin-17 (Output) of ICBase-2 (74LS90).
  5. Connect Pin-1 (Input) of ICBase-1 (74LS90) to Pin-18 (Output) of ICBase-1 (74LS90).
  6. Add IC 74LS08 into ICBase-3 (74LS08).
  7. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS08).
  8. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS08).
  9. Connect VCC Port to Pin-5 (VCC) of ICBase-1 (74LS90).
  10. Connect VCC Port to Pin-5 (VCC) of ICBase-2 (74LS90).
  11. Connect Pin-1 (Input) of ICBase-3 (74LS08) to Pin-18 (Output) of ICBase-2 (74LS90).
  12. Connect Pin-2 (Input) of ICBase-3 (74LS08) to Pin-15 (Output) of ICBase-2 (74LS90).
  13. Connect Pin-4 (Input) of ICBase-3 (74LS08) to Pin-3 (Output) of ICBase-3 (74LS08).
  14. Connect Pin-5 (Input) of ICBase-3 (74LS08) to Pin-14 (Output) of ICBase-2 (74LS90).
  15. Connect Pin-19 (Input) of ICBase-3 (74LS08) to Pin-6 (Output) of ICBase-3 (74LS08).
  16. Connect Pin-18 (Input) of ICBase-3 (74LS08) to Pin-18 (Output) of ICBase-1 (74LS90).
  17. Connect GND Port to Pin-6 (Input) of ICBase-2 (74LS90).
  18. Connect GND Port to Pin-7 (Input) of ICBase-2 (74LS90).
  19. Connect GND Port to Pin-6 (Input) of ICBase-1 (74LS90).
  20. Connect GND Port to Pin-7 (Input) of ICBase-1 (74LS90).
  21. Connect Pin-2 (Input) of ICBase-2 (74LS90) to Pin-17 (Output) of ICBase-3 (74LS08).
  22. Connect Pin-3 (Input) of ICBase-2 (74LS90) to Pin-17 (Output) of ICBase-3 (74LS08).
  23. Connect Pin-2 (Input) of ICBase-1 (74LS90) to Pin-17 (Output) of ICBase-3 (74LS08).
  24. Connect Pin-3 (Input) of ICBase-1 (74LS90) to Pin-17 (Output) of ICBase-3 (74LS08).
  25. Connect GND Port to Pin-16 (Ground) of ICBase-1 (74LS90).
  26. Connect GND Port to Pin-16 (Ground) of ICBase-2 (74LS90).
  27. Connect Clock port of 1Hz frequency to Pin-20 (Input) of ICBase-2 (74LS90).
  28. Connect Seven segment display 1 to Pin-18 (Output) of ICBase-2 (74LS90).
  29. Connect Seven segment display 1 to Pin-17 (Output) of ICBase-2 (74LS90).
  30. Connect Seven segment display 1 to Pin-15 (Output) of ICBase-2 (74LS90).
  31. Connect Seven segment display 1 to Pin-14 (Output) of ICBase-2 (74LS90).
  32. Connect Seven segment display 2 to Pin-18 (Output) of ICBase-1 (74LS90).
  33. Connect Seven segment display 2 to Pin-15 (Output) of ICBase-1 (74LS90).
  34. Connect Seven segment display 2 to Pin-14 (Output) of ICBase-1 (74LS90).
  35. Connect Seven segment display 2 to Pin-17 (Output) of ICBase-1 (74LS90).