Multiplexer using two function

Suraj
Suraj Kumar
• Created on Dec 9, 2024 • 0 • 0 • 2
Edit Circuit Copy Circuit Try Yourself
Multiplexer using two function
100%

Integrated Circuits Used

74LS153 74LS02

Procedure

  1. Add IC 74LS153 into ICBase-1 (74LS153).
  2. Connect GND Port to Pin-8 (Ground) of ICBase-1 (74LS153).
  3. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS153).
  4. Connect Seven segment display 1 to Pin-7 (Output) of ICBase-1 (74LS153).
  5. Connect Pin-6 (Input) of ICBase-1 (74LS153) to Input-2.
  6. Add IC 74LS02 into ICBase-2 (74LS02).
  7. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS02).
  8. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS02).
  9. Connect Pin-2 (Input) of ICBase-2 (74LS02) to Input-2.
  10. Connect Pin-4 (Input) of ICBase-1 (74LS153) to Pin-1 (Output) of ICBase-2 (74LS02).
  11. Connect VCC Port to Pin-5 (Input) of ICBase-1 (74LS153).
  12. Connect GND Port to Pin-3 (Input) of ICBase-1 (74LS153).
  13. Connect Input-1 to Pin-2 (Input) of ICBase-1 (74LS153).
  14. Connect Input-0 to Pin-18 (Input) of ICBase-1 (74LS153).