JK FF USING NAND

NANDHANA
NANDHANA KM
• Created on Jul 10, 2024 • 0 • 0 • 2
Edit Circuit Copy Circuit Try Yourself
JK FF USING NAND
100%

Integrated Circuits Used

74LS10 74LS00

Procedure

  1. Add IC 74LS10 into ICBase-1 (74LS10).
  2. Add IC 74LS00 into ICBase-2 (74LS00).
  3. Connect Input-14 to Pin-2 (Input) of ICBase-1 (74LS10).
  4. Connect Pin-4 (Input) of ICBase-1 (74LS10) to Input-13.
  5. Connect Clock port of 1Hz frequency to Pin-3 (Input) of ICBase-1 (74LS10).
  6. Connect Pin-19 (Input) of ICBase-1 (74LS10) to Clock port of 1Hz frequency.
  7. Connect Pin-6 (Output) of ICBase-2 (74LS00) to Pin-1 (Input) of ICBase-1 (74LS10).
  8. Connect Pin-3 (Output) of ICBase-2 (74LS00) to Pin-5 (Input) of ICBase-1 (74LS10).
  9. Connect Pin-1 (Input) of ICBase-2 (74LS00) to Pin-18 (Output) of ICBase-1 (74LS10).
  10. Connect Pin-6 (Output) of ICBase-2 (74LS00) to Pin-2 (Input) of ICBase-2 (74LS00).
  11. Connect Pin-5 (Input) of ICBase-2 (74LS00) to Pin-6 (Output) of ICBase-1 (74LS10).
  12. Connect Pin-3 (Output) of ICBase-2 (74LS00) to Pin-4 (Input) of ICBase-2 (74LS00).
  13. Connect Output-9 to Pin-3 (Output) of ICBase-2 (74LS00).
  14. Connect Output-8 to Pin-6 (Output) of ICBase-2 (74LS00).
  15. Connect Pin-7 (Ground) of ICBase-1 (74LS10) to GND Port.
  16. Connect Pin-7 (Ground) of ICBase-2 (74LS00) to GND Port.
  17. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS00).
  18. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS10).
  19. Connect Input-13 to ICBase-1 (74LS10).
  20. Connect GND Port to ICBase-1 (74LS10).