Half Adder using basic gates

Humanshu
Humanshu Ise
• Created on Jul 11, 2024 • 0 • 0 • 3
Edit Circuit Copy Circuit Try Yourself
Half Adder using basic gates
100%

Integrated Circuits Used

74LS00 74LS08 74LS32

Procedure

  1. Add IC 74LS00 into ICBase-1 (74LS00).
  2. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS00).
  3. Connect Pin-7 (Ground) of ICBase-1 (74LS00) to GND Port.
  4. Connect Input-1 to Pin-1 (Input) of ICBase-1 (74LS00).
  5. Connect Input-1 to Pin-2 (Input) of ICBase-1 (74LS00).
  6. Add IC 74LS00 into ICBase-2 (74LS00).
  7. Connect Input-2 to Pin-1 (Input) of ICBase-2 (74LS00).
  8. Connect Input-2 to Pin-2 (Input) of ICBase-2 (74LS00).
  9. Connect GND Port to ICBase-1 (74LS00).
  10. Add IC 74LS08 into ICBase-3 (74LS08).
  11. Connect Input-1 to Pin-1 (Input) of ICBase-3 (74LS08).
  12. Connect Pin-2 (Input) of ICBase-3 (74LS08) to Pin-3 (Output) of ICBase-2 (74LS00).
  13. Connect Input-2 to Pin-4 (Input) of ICBase-3 (74LS08).
  14. Connect Pin-3 (Output) of ICBase-1 (74LS00) to Pin-5 (Input) of ICBase-3 (74LS08).
  15. Connect Input-2 to ICBase-3 (74LS08).
  16. Connect Pin-5 (Input) of ICBase-3 (74LS08) to ICBase-1 (74LS00).
  17. Add IC 74LS32 into ICBase-4 (74LS32).
  18. Connect Pin-3 (Output) of ICBase-3 (74LS08) to Pin-1 (Input) of ICBase-4 (74LS32).
  19. Connect Pin-2 (Input) of ICBase-4 (74LS32) to Pin-6 (Output) of ICBase-3 (74LS08).
  20. Connect Pin-3 (Output) of ICBase-4 (74LS32) to Output-1.
  21. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS00).
  22. Connect Pin-20 (VCC) of ICBase-3 (74LS08) to VCC Port.
  23. Connect Pin-20 (VCC) of ICBase-4 (74LS32) to VCC Port.
  24. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS00).
  25. Connect Pin-7 (Ground) of ICBase-3 (74LS08) to GND Port.
  26. Connect GND Port to Pin-7 (Ground) of ICBase-4 (74LS32).
  27. Connect Input-1 to Pin-16 (Input) of ICBase-3 (74LS08).
  28. Connect Input-2 to Pin-15 (Input) of ICBase-3 (74LS08).
  29. Connect Pin-14 (Output) of ICBase-3 (74LS08) to Output-2.
  30. Connect Pin-3 (Output) of ICBase-3 (74LS08) to ICBase-4 (74LS32).
  31. Connect Pin-1 (Input) of ICBase-4 (74LS32) to ICBase-3 (74LS08).
  32. Connect Output-1 to ICBase-4 (74LS32).
  33. Connect Input-2 to ICBase-4 (74LS32).