Full Adder using Basic Gates

Harsh
Harsh Aswar
• Created on Dec 20, 2020 • 0 • 0 • 3
Edit Circuit Copy Circuit Try Yourself
Full Adder using Basic Gates
100%

Integrated Circuits Used

74LS86 74LS08 74LS32

Procedure

  1. Add IC 74LS86 into ICBase-1 (74LS86).
  2. Add IC 74LS08 into ICBase-2 (74LS08).
  3. Add IC 74LS32 into ICBase-3 (74LS32).
  4. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS86).
  5. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS08).
  6. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS32).
  7. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS86).
  8. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS08).
  9. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS32).
  10. Connect Input-15 to Pin-1 (Input) of ICBase-1 (74LS86).
  11. Connect Input-14 to Pin-2 (Input) of ICBase-1 (74LS86).
  12. Connect Pin-4 (Input) of ICBase-1 (74LS86) to Pin-3 (Output) of ICBase-1 (74LS86).
  13. Connect Pin-5 (Input) of ICBase-1 (74LS86) to Input-13.
  14. Connect Output-13 to Pin-6 (Output) of ICBase-1 (74LS86).
  15. Connect Pin-1 (Input) of ICBase-2 (74LS08) to Pin-3 (Output) of ICBase-1 (74LS86).
  16. Connect Pin-2 (Input) of ICBase-2 (74LS08) to Input-13.
  17. Connect Pin-1 (Input) of ICBase-3 (74LS32) to Pin-3 (Output) of ICBase-2 (74LS08).
  18. Connect Output-12 to Pin-3 (Output) of ICBase-3 (74LS32).
  19. Connect Pin-4 (Input) of ICBase-2 (74LS08) to Input-15.
  20. Connect Pin-5 (Input) of ICBase-2 (74LS08) to Input-14.
  21. Connect Pin-2 (Input) of ICBase-3 (74LS32) to Pin-6 (Output) of ICBase-2 (74LS08).