Full subtracter using mux - Copy

HARSHWARDHAN
HARSHWARDHAN LAIGUDE
• Created on May 9, 2023 • 0 • 0 • 1
Edit Circuit Copy Circuit Try Yourself
Full subtracter using mux - Copy
100%

Integrated Circuits Used

74LS151

Procedure

  1. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS151).
  2. Connect Input-10 to Pin-13 (Input) of ICBase-1 (74LS151).
  3. Connect Input-9 to Pin-14 (Input) of ICBase-1 (74LS151).
  4. Connect Input-8 to Pin-15 (Input) of ICBase-1 (74LS151).
  5. Connect Pin-13 (Input) of ICBase-2 (74LS151) to Input-10.
  6. Connect Pin-14 (Input) of ICBase-2 (74LS151) to Input-9.
  7. Connect Input-8 to Pin-15 (Input) of ICBase-2 (74LS151).
  8. Connect Output-15 to Pin-5 (Output) of ICBase-1 (74LS151).
  9. Connect Pin-5 (Output) of ICBase-2 (74LS151) to Output-14.
  10. Connect GND Port to Pin-4 (Input) of ICBase-1 (74LS151).
  11. Connect VCC Port to Pin-3 (Input) of ICBase-1 (74LS151).
  12. Connect VCC Port to Pin-2 (Input) of ICBase-1 (74LS151).
  13. Connect GND Port to Pin-1 (Input) of ICBase-1 (74LS151).
  14. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS151).
  15. Connect VCC Port to Pin-19 (Input) of ICBase-1 (74LS151).
  16. Connect GND Port to Pin-18 (Input) of ICBase-1 (74LS151).
  17. Connect GND Port to Pin-17 (Input) of ICBase-1 (74LS151).
  18. Connect VCC Port to Pin-16 (Input) of ICBase-1 (74LS151).
  19. Connect GND Port to Pin-7 (Input) of ICBase-1 (74LS151).
  20. Connect GND Port to Pin-8 (Ground) of ICBase-1 (74LS151).
  21. Connect GND Port to Pin-7 (Input) of ICBase-2 (74LS151).
  22. Connect GND Port to Pin-8 (Ground) of ICBase-2 (74LS151).
  23. Connect GND Port to Pin-4 (Input) of ICBase-2 (74LS151).
  24. Connect VCC Port to Pin-3 (Input) of ICBase-2 (74LS151).
  25. Connect VCC Port to Pin-2 (Input) of ICBase-2 (74LS151).
  26. Connect VCC Port to Pin-1 (Input) of ICBase-2 (74LS151).
  27. Connect GND Port to Pin-19 (Input) of ICBase-2 (74LS151).
  28. Connect GND Port to Pin-18 (Input) of ICBase-2 (74LS151).
  29. Connect GND Port to Pin-17 (Input) of ICBase-2 (74LS151).
  30. Connect VCC Port to Pin-16 (Input) of ICBase-2 (74LS151).
  31. Add IC 74LS151 into ICBase-1 (74LS151).
  32. Add IC 74LS151 into ICBase-2 (74LS151).