full adder

Manas
Manas Zambre
• Created on May 7, 2023 • 0 • 0 • 1
Edit Circuit Copy Circuit Try Yourself
full adder
100%

Integrated Circuits Used

74LS151

Procedure

  1. Add IC 74LS151 into ICBase-2 (74LS151).
  2. Add IC 74LS151 into ICBase-4 (74LS151).
  3. Connect VCC Port to Pin-20 (VCC) of ICBase-4 (74LS151).
  4. Connect GND Port to Pin-8 (Ground) of ICBase-2 (74LS151).
  5. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS151).
  6. Connect GND Port to Pin-8 (Ground) of ICBase-4 (74LS151).
  7. Connect GND Port to Pin-1 (Input) of ICBase-2 (74LS151).
  8. Connect GND Port to Pin-4 (Input) of ICBase-2 (74LS151).
  9. Connect GND Port to Pin-18 (Input) of ICBase-2 (74LS151).
  10. Connect GND Port to Pin-17 (Input) of ICBase-2 (74LS151).
  11. Connect VCC Port to Pin-3 (Input) of ICBase-2 (74LS151).
  12. Connect VCC Port to Pin-2 (Input) of ICBase-2 (74LS151).
  13. Connect VCC Port to Pin-19 (Input) of ICBase-2 (74LS151).
  14. Connect VCC Port to Pin-16 (Input) of ICBase-2 (74LS151).
  15. Connect GND Port to Pin-4 (Input) of ICBase-4 (74LS151).
  16. Connect GND Port to Pin-3 (Input) of ICBase-4 (74LS151).
  17. Connect GND Port to Pin-2 (Input) of ICBase-4 (74LS151).
  18. Connect GND Port to Pin-19 (Input) of ICBase-4 (74LS151).
  19. Connect VCC Port to Pin-1 (Input) of ICBase-4 (74LS151).
  20. Connect Pin-18 (Input) of ICBase-4 (74LS151) to VCC Port.
  21. Connect VCC Port to Pin-17 (Input) of ICBase-4 (74LS151).
  22. Connect Pin-16 (Input) of ICBase-4 (74LS151) to VCC Port.
  23. Connect Output-1 to Pin-5 (Output) of ICBase-2 (74LS151).
  24. Connect Pin-5 (Output) of ICBase-4 (74LS151) to Output-0.
  25. Connect Input-0 to Pin-15 (Input) of ICBase-2 (74LS151).
  26. Connect Pin-14 (Input) of ICBase-2 (74LS151) to Input-1.
  27. Connect Input-2 to Pin-13 (Input) of ICBase-2 (74LS151).
  28. Connect Input-0 to Pin-15 (Input) of ICBase-4 (74LS151).
  29. Connect Pin-14 (Input) of ICBase-4 (74LS151) to Input-1.
  30. Connect Input-2 to Pin-13 (Input) of ICBase-4 (74LS151).
  31. Connect Pin-7 (Input) of ICBase-4 (74LS151) to Manual clock Port.
  32. Connect Pin-7 (Input) of ICBase-2 (74LS151) to Manual clock Port.
  33. Connect GND Port to ICBase-4 (74LS151).
  34. Connect GND Port to ICBase-2 (74LS151).
  35. Connect Manual clock Port to ICBase-2 (74LS151).