Full Subtractor Using MUX

Madhavrao
Madhavrao Sonone
• Created on Feb 26, 2023 • 0 • 0 • 1
Edit Circuit Copy Circuit Try Yourself
Full Subtractor Using MUX
100%

Integrated Circuits Used

74LS151

Procedure

  1. Connect GND Port to Pin-8 (Ground) of ICBase-2 (74LS151).
  2. Connect GND Port to Pin-7 (Input) of ICBase-2 (74LS151).
  3. Connect GND Port to Pin-8 (Ground) of ICBase-3 (74LS151).
  4. Connect GND Port to Pin-7 (Input) of ICBase-3 (74LS151).
  5. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS151).
  6. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS151).
  7. Connect Output-15 to Pin-5 (Output) of ICBase-2 (74LS151).
  8. Connect Output-14 to Pin-5 (Output) of ICBase-3 (74LS151).
  9. Connect Input-15 to Pin-13 (Input) of ICBase-2 (74LS151).
  10. Connect Input-14 to Pin-14 (Input) of ICBase-2 (74LS151).
  11. Connect Input-13 to Pin-15 (Input) of ICBase-2 (74LS151).
  12. Connect Pin-13 (Input) of ICBase-3 (74LS151) to Input-15.
  13. Connect Pin-14 (Input) of ICBase-3 (74LS151) to Input-14.
  14. Connect Pin-15 (Input) of ICBase-3 (74LS151) to Input-13.
  15. Connect GND Port to Pin-4 (Input) of ICBase-2 (74LS151).
  16. Connect VCC Port to Pin-3 (Input) of ICBase-2 (74LS151).
  17. Connect VCC Port to Pin-2 (Input) of ICBase-2 (74LS151).
  18. Connect GND Port to Pin-1 (Input) of ICBase-2 (74LS151).
  19. Connect VCC Port to Pin-19 (Input) of ICBase-2 (74LS151).
  20. Connect GND Port to Pin-18 (Input) of ICBase-2 (74LS151).
  21. Connect GND Port to Pin-17 (Input) of ICBase-2 (74LS151).
  22. Connect VCC Port to Pin-16 (Input) of ICBase-2 (74LS151).
  23. Connect GND Port to Pin-4 (Input) of ICBase-3 (74LS151).
  24. Connect VCC Port to Pin-3 (Input) of ICBase-3 (74LS151).
  25. Connect VCC Port to Pin-2 (Input) of ICBase-3 (74LS151).
  26. Connect VCC Port to Pin-1 (Input) of ICBase-3 (74LS151).
  27. Connect VCC Port to Pin-16 (Input) of ICBase-3 (74LS151).
  28. Connect GND Port to Pin-19 (Input) of ICBase-3 (74LS151).
  29. Connect GND Port to Pin-18 (Input) of ICBase-3 (74LS151).
  30. Connect GND Port to Pin-17 (Input) of ICBase-3 (74LS151).
  31. Add IC 74LS151 into ICBase-2 (74LS151).
  32. Add IC 74LS151 into ICBase-3 (74LS151).