MultiplexerTruthTable(31/1/23)

Hrishikesh
Hrishikesh Iyer
• Created on Jan 31, 2023 • 0 • 0 • 1
Edit Circuit Copy Circuit Try Yourself
MultiplexerTruthTable(31/1/23)
100%

Integrated Circuits Used

74LS151

Description

//Set-up 1.Connect usual GND and VCC ; STROBE. 2.Connect D0-D7 to input switches I0-I7. 3.Connect OUTPUT. 4.Connect ABC. //Verification 1.Take a particular binary combination in ABC. Eg: 101 ; now convert 101 to decimal ==> 5 . Switch ON I5. 2.OUT should be HIGH now. Toggling any other Input switches will NOT alter the Output voltage(high/low).

Procedure

  1. Add IC 74LS151 into ICBase-1 (74LS151).
  2. Connect GND Port to Pin-8 (Ground) of ICBase-1 (74LS151).
  3. Connect GND Port to Pin-7 (Input) of ICBase-1 (74LS151).
  4. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS151).
  5. Connect Output-15 to Pin-5 (Output) of ICBase-1 (74LS151).
  6. Connect Input-0 to Pin-4 (Input) of ICBase-1 (74LS151).
  7. Connect Input-1 to Pin-3 (Input) of ICBase-1 (74LS151).
  8. Connect Input-2 to Pin-2 (Input) of ICBase-1 (74LS151).
  9. Connect Input-3 to Pin-1 (Input) of ICBase-1 (74LS151).
  10. Connect Input-4 to Pin-16 (Input) of ICBase-1 (74LS151).
  11. Connect Input-5 to Pin-17 (Input) of ICBase-1 (74LS151).
  12. Connect Input-6 to Pin-18 (Input) of ICBase-1 (74LS151).
  13. Connect Input-7 to Pin-19 (Input) of ICBase-1 (74LS151).
  14. Connect Input-11 to Pin-13 (Input) of ICBase-1 (74LS151).
  15. Connect Input-10 to Pin-14 (Input) of ICBase-1 (74LS151).
  16. Connect Input-9 to Pin-15 (Input) of ICBase-1 (74LS151).
  17. Connect Input-7 to ICBase-1 (74LS151).