blinking led

KAVIN
KAVIN KARKERA
• Created on Nov 9, 2022 • 1 • 1 • 2
Edit Circuit Copy Circuit Try Yourself
blinking led
100%

Integrated Circuits Used

74LS08 74LS04

Procedure

  1. Connect Pin-1 (Input) of ICBase-3 (74LS08) to Input-1.
  2. Add IC 74LS08 into ICBase-3 (74LS08).
  3. Add IC 74LS04 into ICBase-4 (74LS04).
  4. Connect Pin-1 (Input) of ICBase-4 (74LS04) to Clock port of 0.5Hz frequency.
  5. Connect Pin-2 (Input) of ICBase-3 (74LS08) to Pin-2 (Output) of ICBase-4 (74LS04).
  6. Connect Output-1 to Pin-3 (Output) of ICBase-3 (74LS08).
  7. Connect Pin-3 (Input) of ICBase-4 (74LS04) to Pin-3 (Output) of ICBase-3 (74LS08).
  8. Connect Output-2 to Pin-4 (Output) of ICBase-4 (74LS04).
  9. Connect VCC Port to Pin-20 (VCC) of ICBase-4 (74LS04).
  10. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS08).
  11. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS08).
  12. Connect Pin-7 (Ground) of ICBase-3 (74LS08) to Pin-7 (Ground) of ICBase-4 (74LS04).
  13. Connect Pin-20 (VCC) of ICBase-3 (74LS08) to Pin-20 (VCC) of ICBase-4 (74LS04).
  14. Connect Pin-1 (Input) of ICBase-4 (74LS04) to Clock port of 1Hz frequency.
  15. Connect Pin-1 (Input) of ICBase-4 (74LS04) to Clock port of 5Hz frequency.
  16. Connect Pin-1 (Input) of ICBase-4 (74LS04) to Clock port of 10Hz frequency.
  17. Connect Output-4 to Pin-4 (Output) of ICBase-4 (74LS04).
  18. Connect Output-6 to Pin-4 (Output) of ICBase-4 (74LS04).
  19. Connect Output-3 to Pin-3 (Output) of ICBase-3 (74LS08).
  20. Connect Output-5 to Pin-3 (Output) of ICBase-3 (74LS08).