FuLL Adder using EXOR

Jaysingrao
Jaysingrao Talekar
• Created on Jan 12, 2022 • 1 • 0 • 3
Edit Circuit Copy Circuit Try Yourself
FuLL Adder using EXOR
100%

Integrated Circuits Used

74LS86 74LS08 74LS32

Procedure

  1. Add IC 74LS86 into ICBase-1 (74LS86).
  2. Add IC 74LS08 into ICBase-2 (74LS08).
  3. Add IC 74LS32 into ICBase-3 (74LS32).
  4. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS32).
  5. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS08).
  6. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS86).
  7. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS32).
  8. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS08).
  9. Connect Pin-7 (Ground) of ICBase-1 (74LS86) to GND Port.
  10. Connect Output-1 to Pin-3 (Output) of ICBase-3 (74LS32).
  11. Connect Output-0 to Pin-17 (Output) of ICBase-1 (74LS86).
  12. Connect Pin-18 (Input) of ICBase-1 (74LS86) to Pin-14 (Output) of ICBase-1 (74LS86).
  13. Connect Pin-19 (Input) of ICBase-1 (74LS86) to Input-3.
  14. Connect Input-2 to Pin-15 (Input) of ICBase-1 (74LS86).
  15. Connect Pin-16 (Input) of ICBase-1 (74LS86) to Input-1.
  16. Connect Pin-16 (Input) of ICBase-2 (74LS08) to Input-1.
  17. Connect Input-2 to Pin-15 (Input) of ICBase-2 (74LS08).
  18. Connect Pin-14 (Output) of ICBase-2 (74LS08) to Pin-2 (Input) of ICBase-3 (74LS32).
  19. Connect Pin-18 (Input) of ICBase-2 (74LS08) to Input-3.
  20. Connect Pin-14 (Output) of ICBase-1 (74LS86) to Pin-19 (Input) of ICBase-2 (74LS08).
  21. Connect Pin-1 (Input) of ICBase-3 (74LS32) to Pin-17 (Output) of ICBase-2 (74LS08).
  22. Connect GND Port to ICBase-3 (74LS32).
  23. Connect Pin-2 (Input) of ICBase-3 (74LS32) to ICBase-2 (74LS08).
  24. Connect Input-3 to ICBase-2 (74LS08).