HALF ADDER

HARDIK
HARDIK JAIN
• Created on Dec 1, 2021 • 0 • 0 • 1
Edit Circuit Copy Circuit Try Yourself
HALF ADDER
100%

Integrated Circuits Used

74LS00

Procedure

  1. Add IC 74LS00 into ICBase-1 (74LS00).
  2. Add IC 74LS00 into ICBase-2 (74LS00).
  3. Add IC 74LS00 into ICBase-3 (74LS00).
  4. Add IC 74LS00 into ICBase-4 (74LS00).
  5. Connect Pin-20 (VCC) of ICBase-4 (74LS00) to VCC Port.
  6. Connect Pin-20 (Input & Output) of ICBase-5 to VCC Port.
  7. Connect Pin-20 (VCC) of ICBase-3 (74LS00) to VCC Port.
  8. Connect Pin-20 (VCC) of ICBase-2 (74LS00) to VCC Port.
  9. Connect Pin-20 (VCC) of ICBase-1 (74LS00) to VCC Port.
  10. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS00).
  11. Connect GND Port to Pin-7 (Ground) of ICBase-4 (74LS00).
  12. Connect Pin-7 (Input & Output) of ICBase-5 to GND Port.
  13. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS00).
  14. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS00).
  15. Connect Pin-1 (Input) of ICBase-1 (74LS00) to Input-10.
  16. Connect Pin-2 (Input) of ICBase-1 (74LS00) to Input-10.
  17. Connect Pin-4 (Input) of ICBase-1 (74LS00) to Input-9.
  18. Connect Pin-5 (Input) of ICBase-1 (74LS00) to Input-9.
  19. Connect Pin-1 (Input) of ICBase-2 (74LS00) to Pin-3 (Output) of ICBase-1 (74LS00).
  20. Connect Input-9 to Pin-2 (Input) of ICBase-2 (74LS00).
  21. Connect Pin-5 (Input) of ICBase-2 (74LS00) to Pin-6 (Output) of ICBase-1 (74LS00).
  22. Connect Pin-4 (Input) of ICBase-2 (74LS00) to Input-10.
  23. Connect Pin-2 (Input) of ICBase-3 (74LS00) to Input-9.
  24. Connect Pin-1 (Input) of ICBase-3 (74LS00) to Input-10.
  25. Connect Pin-4 (Input) of ICBase-3 (74LS00) to Pin-3 (Output) of ICBase-3 (74LS00).
  26. Connect Pin-5 (Input) of ICBase-3 (74LS00) to Pin-3 (Output) of ICBase-3 (74LS00).
  27. Connect Pin-1 (Input) of ICBase-4 (74LS00) to Pin-3 (Output) of ICBase-2 (74LS00).
  28. Connect Pin-2 (Input) of ICBase-4 (74LS00) to Pin-6 (Output) of ICBase-2 (74LS00).
  29. Connect Output-6 to Pin-6 (Output) of ICBase-3 (74LS00).
  30. Connect Output-7 to Pin-3 (Output) of ICBase-4 (74LS00).
  31. Connect GND Port to ICBase-1 (74LS00).
  32. Connect Input-10 to ICBase-3 (74LS00).