Asynchronous 3 bit up/down counter - Copy

Nihal
Nihal Yazin
• Created on Oct 6, 2021 • 0 • 0 • 1
Edit Circuit Copy Circuit Try Yourself
Asynchronous 3 bit up/down counter - Copy
100%

Integrated Circuits Used

74LS76

Procedure

  1. Connect Pin-4 (Input) of ICBase-1 (74LS76) to Input-15.
  2. Connect Pin-20 (Input) of ICBase-1 (74LS76) to Input-15.
  3. Connect Pin-13 (Input) of ICBase-1 (74LS76) to Input-15.
  4. Connect Pin-16 (Input) of ICBase-1 (74LS76) to Input-15.
  5. Connect Pin-4 (Input) of ICBase-2 (74LS76) to Input-15.
  6. Connect Pin-20 (Input) of ICBase-2 (74LS76) to Input-15.
  7. Connect Pin-2 (Input) of ICBase-1 (74LS76) to Input-14.
  8. Connect Pin-7 (Input) of ICBase-1 (74LS76) to Input-14.
  9. Connect Pin-2 (Input) of ICBase-2 (74LS76) to Input-14.
  10. Connect Pin-7 (Input) of ICBase-2 (74LS76) to Input-14.
  11. Connect Pin-3 (Input) of ICBase-1 (74LS76) to Input-13.
  12. Connect Pin-8 (Input) of ICBase-1 (74LS76) to Input-13.
  13. Connect Pin-3 (Input) of ICBase-2 (74LS76) to Input-13.
  14. Connect Output-15 to Pin-19 (Output) of ICBase-1 (74LS76).
  15. Connect Pin-1 (Input & Output) of ICBase-3 to Pin-19 (Output) of ICBase-1 (74LS76).
  16. Connect Pin-2 (Input & Output) of ICBase-3 to Input-12.
  17. Connect Pin-6 (Input) of ICBase-1 (74LS76) to Pin-3 (Input & Output) of ICBase-3.
  18. Connect Output-14 to Pin-15 (Output) of ICBase-1 (74LS76).
  19. Connect Pin-4 (Input & Output) of ICBase-3 to Pin-15 (Output) of ICBase-1 (74LS76).
  20. Connect Pin-5 (Input & Output) of ICBase-3 to Input-12.
  21. Connect Pin-1 (Input) of ICBase-2 (74LS76) to Pin-6 (Input & Output) of ICBase-3.
  22. Connect Output-13 to Pin-19 (Output) of ICBase-2 (74LS76).
  23. Connect Manual clock Port to Pin-1 (Input) of ICBase-1 (74LS76).
  24. Connect VCC Port to Pin-5 (VCC) of ICBase-1 (74LS76).
  25. Connect VCC Port to Pin-5 (VCC) of ICBase-2 (74LS76).
  26. Connect VCC Port to Pin-20 (Input & Output) of ICBase-3.
  27. Connect GND Port to Pin-7 (Input & Output) of ICBase-3.
  28. Connect GND Port to Pin-17 (Ground) of ICBase-2 (74LS76).
  29. Connect GND Port to Pin-17 (Ground) of ICBase-1 (74LS76).
  30. Add IC 74LS76 into ICBase-1 (74LS76).
  31. Add IC 74LS76 into ICBase-2 (74LS76).