110 Sequence Detector

Rushikesh
Rushikesh Patade
Created on Sep 30, 2021 undefined 0 undefined 0 undefined 3
110 Sequence Detector
100%

undefined Integrated Circuits Used

undefined Procedure

  1. Add IC 74LS04 into ICBase-3 (74LS04).
  2. Add IC 74LS76 into ICBase-2 (74LS76).
  3. Add IC 74LS08 into ICBase-1 (74LS08).
  4. Connect GND Port to Pin-17 (Ground) of ICBase-2 (74LS76).
  5. Connect Pin-7 (Ground) of ICBase-3 (74LS04) to GND Port.
  6. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS08).
  7. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS08).
  8. Connect Pin-20 (VCC) of ICBase-3 (74LS04) to VCC Port.
  9. Connect Pin-2 (Input) of ICBase-2 (74LS76) to VCC Port.
  10. Connect VCC Port to Pin-3 (Input) of ICBase-2 (74LS76).
  11. Connect VCC Port to Pin-8 (Input) of ICBase-2 (74LS76).
  12. Connect Pin-7 (Input) of ICBase-2 (74LS76) to VCC Port.
  13. Connect Manual clock Port to Pin-1 (Input) of ICBase-2 (74LS76).
  14. Connect Pin-6 (Input) of ICBase-2 (74LS76) to Manual clock Port.
  15. Connect VCC Port to Pin-5 (VCC) of ICBase-2 (74LS76).
  16. Connect VCC Port to Pin-16 (Input) of ICBase-2 (74LS76).
  17. Connect Pin-2 (Output) of ICBase-3 (74LS04) to Pin-20 (Input) of ICBase-2 (74LS76).
  18. Connect Input-0 to Pin-1 (Input) of ICBase-3 (74LS04).
  19. Connect Pin-19 (Output) of ICBase-2 (74LS76) to Pin-3 (Input) of ICBase-3 (74LS04).
  20. Connect Pin-1 (Input) of ICBase-1 (74LS08) to Pin-4 (Output) of ICBase-3 (74LS04).
  21. Connect Input-0 to Pin-2 (Input) of ICBase-1 (74LS08).
  22. Connect Pin-13 (Input) of ICBase-2 (74LS76) to Pin-3 (Output) of ICBase-1 (74LS08).
  23. Connect Pin-4 (Input) of ICBase-1 (74LS08) to Pin-15 (Output) of ICBase-2 (74LS76).
  24. Connect Input-0 to Pin-5 (Input) of ICBase-1 (74LS08).
  25. Connect Pin-4 (Input) of ICBase-2 (74LS76) to Pin-6 (Output) of ICBase-1 (74LS08).
  26. Connect Pin-19 (Input) of ICBase-1 (74LS08) to Pin-19 (Output) of ICBase-2 (74LS76).
  27. Connect Pin-18 (Input) of ICBase-1 (74LS08) to Pin-2 (Output) of ICBase-3 (74LS04).
  28. Connect Output-0 to Pin-17 (Output) of ICBase-1 (74LS08).