JK Flip Flop Synchronous 3-bit UP counter

Rushikesh
Rushikesh Patade
• Created on Sep 20, 2021 • undefined 0 • undefined 0 • undefined 2
undefined Edit Circuit undefined Copy Circuit undefined Try Yourself
JK Flip Flop Synchronous 3-bit UP counter
100%

undefined Integrated Circuits Used

74LS76 74LS08

undefined Procedure

  1. Connect Clock port of 0.5Hz frequency to Pin-1 (Input) of ICBase-1 (74LS76).
  2. Connect Clock port of 0.5Hz frequency to Pin-6 (Input) of ICBase-1 (74LS76).
  3. Connect Clock port of 0.5Hz frequency to Pin-1 (Input) of ICBase-2 (74LS76).
  4. Connect Pin-20 (Input) of ICBase-2 (74LS76) to Pin-3 (Output) of ICBase-3 (74LS08).
  5. Connect Pin-4 (Input) of ICBase-2 (74LS76) to Pin-3 (Output) of ICBase-3 (74LS08).
  6. Connect Pin-5 (VCC) of ICBase-2 (74LS76) to VCC Port.
  7. Connect Pin-5 (VCC) of ICBase-1 (74LS76) to VCC Port.
  8. Connect GND Port to Pin-17 (Ground) of ICBase-2 (74LS76).
  9. Connect GND Port to Pin-17 (Ground) of ICBase-1 (74LS76).
  10. Connect VCC Port to Pin-20 (Input) of ICBase-1 (74LS76).
  11. Connect VCC Port to Pin-4 (Input) of ICBase-1 (74LS76).
  12. Connect VCC Port to Pin-2 (Input) of ICBase-1 (74LS76).
  13. Connect VCC Port to Pin-2 (Input) of ICBase-2 (74LS76).
  14. Connect VCC Port to Pin-7 (Input) of ICBase-1 (74LS76).
  15. Connect VCC Port to Pin-8 (Input) of ICBase-1 (74LS76).
  16. Connect VCC Port to Pin-3 (Input) of ICBase-1 (74LS76).
  17. Connect VCC Port to Pin-3 (Input) of ICBase-2 (74LS76).
  18. Connect Pin-13 (Input) of ICBase-1 (74LS76) to Pin-19 (Output) of ICBase-1 (74LS76).
  19. Connect Pin-16 (Input) of ICBase-1 (74LS76) to Pin-19 (Output) of ICBase-1 (74LS76).
  20. Connect Pin-1 (Input) of ICBase-3 (74LS08) to Pin-19 (Output) of ICBase-1 (74LS76).
  21. Connect Pin-2 (Input) of ICBase-3 (74LS08) to Pin-15 (Output) of ICBase-1 (74LS76).
  22. Connect Output-0 to Pin-19 (Output) of ICBase-1 (74LS76).
  23. Connect Output-1 to Pin-15 (Output) of ICBase-1 (74LS76).
  24. Connect Output-2 to Pin-19 (Output) of ICBase-2 (74LS76).
  25. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS08).
  26. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS08).
  27. Add IC 74LS76 into ICBase-1 (74LS76).
  28. Add IC 74LS76 into ICBase-2 (74LS76).
  29. Add IC 74LS08 into ICBase-3 (74LS08).