exp two using NAND

Aswin
Aswin Anish
• Created on Jun 12, 2021 • 0 • 0 • 1
Edit Circuit Copy Circuit Try Yourself
exp two using NAND
100%

Integrated Circuits Used

74LS00

Procedure

  1. Add IC 74LS00 into ICBase-1 (74LS00).
  2. Add IC 74LS00 into ICBase-2 (74LS00).
  3. Add IC 74LS00 into ICBase-3 (74LS00).
  4. Connect Pin-1 (Input) of ICBase-1 (74LS00) to Input-1.
  5. Connect Input-1 to Pin-2 (Input) of ICBase-1 (74LS00).
  6. Connect Pin-4 (Input) of ICBase-1 (74LS00) to Input-3.
  7. Connect Input-3 to Pin-5 (Input) of ICBase-1 (74LS00).
  8. Connect Pin-1 (Input) of ICBase-2 (74LS00) to Input-0.
  9. Connect Pin-2 (Input) of ICBase-2 (74LS00) to Pin-3 (Output) of ICBase-1 (74LS00).
  10. Connect Pin-4 (Input) of ICBase-2 (74LS00) to Input-2.
  11. Connect Pin-5 (Input) of ICBase-2 (74LS00) to Pin-6 (Output) of ICBase-1 (74LS00).
  12. Connect Pin-1 (Input) of ICBase-3 (74LS00) to Pin-3 (Output) of ICBase-2 (74LS00).
  13. Connect Pin-2 (Input) of ICBase-3 (74LS00) to Pin-6 (Output) of ICBase-2 (74LS00).
  14. Connect Output-3 to Pin-3 (Output) of ICBase-3 (74LS00).
  15. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS00).
  16. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS00).
  17. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS00).
  18. Connect Pin-7 (Ground) of ICBase-3 (74LS00) to GND Port.
  19. Connect Pin-7 (Ground) of ICBase-2 (74LS00) to GND Port.
  20. Connect Pin-7 (Ground) of ICBase-1 (74LS00) to GND Port.