MUX using NAND Gate

Hiba
Hiba Safinaz
• Created on Jun 3, 2021 • 0 • 0 • 3
Edit Circuit Copy Circuit Try Yourself
MUX using NAND Gate
100%

Integrated Circuits Used

74LS04 74LS10 74LS20

Procedure

  1. Add IC 74LS04 into ICBase-1 (74LS04).
  2. Add IC 74LS10 into ICBase-2 (74LS10).
  3. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS04).
  4. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS10).
  5. Connect GND Port to Pin-7 (Ground) of ICBase-3 (74LS10).
  6. Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS04).
  7. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS10).
  8. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS10).
  9. Connect Pin-1 (Input) of ICBase-1 (74LS04) to Input-1.
  10. Connect Input-0 to Pin-3 (Input) of ICBase-1 (74LS04).
  11. Connect Pin-1 (Input) of ICBase-2 (74LS10) to Input-10.
  12. Connect Pin-2 (Input) of ICBase-2 (74LS10) to Pin-2 (Output) of ICBase-1 (74LS04).
  13. Connect Pin-4 (Output) of ICBase-1 (74LS04) to Pin-19 (Input) of ICBase-2 (74LS10).
  14. Connect Input-11 to Pin-3 (Input) of ICBase-2 (74LS10).
  15. Connect Pin-2 (Output) of ICBase-1 (74LS04) to Pin-4 (Input) of ICBase-2 (74LS10).
  16. Connect Pin-4 (Output) of ICBase-1 (74LS04) to Pin-5 (Input) of ICBase-2 (74LS10).
  17. Add IC 74LS20 into ICBase-4 (74LS20).
  18. Connect Pin-1 (Input) of ICBase-4 (74LS20) to Pin-18 (Output) of ICBase-2 (74LS10).
  19. Connect Pin-2 (Input) of ICBase-4 (74LS20) to Pin-6 (Output) of ICBase-2 (74LS10).
  20. Connect GND Port to Pin-7 (Ground) of ICBase-4 (74LS20).
  21. Connect VCC Port to Pin-20 (VCC) of ICBase-4 (74LS20).
  22. Connect Input-12 to Pin-15 (Input) of ICBase-2 (74LS10).
  23. Connect Input-1 to Pin-16 (Input) of ICBase-2 (74LS10).
  24. Connect Pin-4 (Output) of ICBase-1 (74LS04) to Pin-17 (Input) of ICBase-2 (74LS10).
  25. Connect Pin-4 (Input) of ICBase-4 (74LS20) to Pin-14 (Output) of ICBase-2 (74LS10).
  26. Connect Input-13 to Pin-1 (Input) of ICBase-3 (74LS10).
  27. Connect Input-1 to Pin-2 (Input) of ICBase-3 (74LS10).
  28. Connect Input-0 to Pin-19 (Input) of ICBase-3 (74LS10).
  29. Connect Pin-5 (Input) of ICBase-4 (74LS20) to Pin-18 (Output) of ICBase-3 (74LS10).
  30. Connect Output-2 to Pin-6 (Output) of ICBase-4 (74LS20).
  31. Add IC 74LS10 into ICBase-3 (74LS10).
  32. Connect VCC Port to ICBase-2 (74LS10).