JK flip flop

Ansith
Ansith S
• Created on Jul 6, 2021 • 0 • 0 • 2
Edit Circuit Copy Circuit Try Yourself
JK flip flop
100%

Integrated Circuits Used

74LS10 74LS00

Procedure

  1. Add IC 74LS10 into ICBase-1 (74LS10).
  2. Add IC 74LS00 into ICBase-2 (74LS00).
  3. Connect Pin-20 (VCC) of ICBase-1 (74LS10) to VCC Port.
  4. Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS00).
  5. Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS10).
  6. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS00).
  7. Connect Pin-4 (Input) of ICBase-1 (74LS10) to Input-15.
  8. Connect Pin-16 (Input) of ICBase-1 (74LS10) to Input-12.
  9. Connect Pin-1 (Input) of ICBase-2 (74LS00) to Pin-6 (Output) of ICBase-1 (74LS10).
  10. Connect Pin-4 (Input) of ICBase-2 (74LS00) to Pin-14 (Output) of ICBase-1 (74LS10).
  11. Connect Output-4 to Pin-3 (Output) of ICBase-2 (74LS00).
  12. Connect Output-2 to Pin-6 (Output) of ICBase-2 (74LS00).
  13. Connect Pin-17 (Input) of ICBase-1 (74LS10) to Pin-3 (Output) of ICBase-2 (74LS00).
  14. Connect Pin-5 (Input) of ICBase-1 (74LS10) to Pin-6 (Output) of ICBase-2 (74LS00).
  15. Connect Pin-5 (Input) of ICBase-2 (74LS00) to Pin-3 (Output) of ICBase-2 (74LS00).
  16. Connect Pin-2 (Input) of ICBase-2 (74LS00) to Pin-6 (Output) of ICBase-2 (74LS00).
  17. Connect Pin-15 (Input) of ICBase-1 (74LS10) to Clock port of 0.5Hz frequency.
  18. Connect Pin-3 (Input) of ICBase-1 (74LS10) to Clock port of 0.5Hz frequency.