D_FLIP_FLOP

Rehan
Rehan Roy
Created on Jan 27, 2021 0 0 2
D_FLIP_FLOP
100%

Integrated Circuits Used

Procedure

  1. Add IC 74LS00 into ICBase-2 (74LS00).
  2. Add IC 74LS00 into ICBase-3 (74LS00).
  3. Connect Pin-20 (VCC) of ICBase-3 (74LS00) to Pin-20 (VCC) of ICBase-2 (74LS00).
  4. Connect Pin-7 (Ground) of ICBase-3 (74LS00) to Pin-7 (Ground) of ICBase-2 (74LS00).
  5. Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS00).
  6. Connect VCC Port to Pin-20 (VCC) of ICBase-3 (74LS00).
  7. Connect Input-0 to Pin-1 (Input) of ICBase-2 (74LS00).
  8. Connect Pin-19 (Input) of ICBase-2 (74LS00) to Pin-3 (Output) of ICBase-2 (74LS00).
  9. Connect Pin-16 (Input) of ICBase-2 (74LS00) to Pin-6 (Output) of ICBase-2 (74LS00).
  10. Connect Pin-14 (Output) of ICBase-2 (74LS00) to Pin-18 (Input) of ICBase-2 (74LS00).
  11. Connect Pin-17 (Output) of ICBase-2 (74LS00) to Pin-15 (Input) of ICBase-2 (74LS00).
  12. Connect Output-0 to Pin-14 (Output) of ICBase-2 (74LS00).
  13. Connect Output-1 to Pin-17 (Output) of ICBase-2 (74LS00).
  14. Connect Pin-2 (Input) of ICBase-2 (74LS00) to Clock port of 10Hz frequency.
  15. Connect Clock port of 10Hz frequency to Pin-4 (Input) of ICBase-2 (74LS00).
  16. Add IC 74LS04 into ICBase-4 (74LS04).
  17. Connect Pin-20 (VCC) of ICBase-3 (74LS00) to Pin-20 (VCC) of ICBase-4 (74LS04).
  18. Connect GND Port to Pin-7 (Ground) of ICBase-4 (74LS04).
  19. Connect Pin-1 (Input) of ICBase-4 (74LS04) to Input-0.
  20. Connect Pin-5 (Input) of ICBase-2 (74LS00) to Pin-2 (Output) of ICBase-4 (74LS04).