Integrated Circuits Used
Procedure
- Add IC 74LS10 into ICBase-1 (74LS10).
- Connect VCC Port to Pin-20 (VCC) of ICBase-1 (74LS10).
- Connect GND Port to Pin-7 (Ground) of ICBase-1 (74LS10).
- Connect Clock port of 5Hz frequency to Pin-2 (Input) of ICBase-1 (74LS10).
- Add IC 74LS00 into ICBase-2 (74LS00).
- Connect Pin-4 (Input) of ICBase-2 (74LS00) to Pin-3 (Output) of ICBase-2 (74LS00).
- Connect Pin-2 (Input) of ICBase-2 (74LS00) to Pin-6 (Output) of ICBase-2 (74LS00).
- Connect GND Port to Pin-7 (Ground) of ICBase-2 (74LS00).
- Connect VCC Port to Pin-20 (VCC) of ICBase-2 (74LS00).
- Connect Pin-1 (Input) of ICBase-2 (74LS00) to Pin-18 (Output) of ICBase-1 (74LS10).
- Connect Clock port of 5Hz frequency to Pin-3 (Input) of ICBase-1 (74LS10).
- Connect Pin-5 (Input) of ICBase-2 (74LS00) to Pin-6 (Output) of ICBase-1 (74LS10).
- Connect Output-0 to Pin-3 (Output) of ICBase-2 (74LS00).
- Connect Output-2 to Pin-6 (Output) of ICBase-2 (74LS00).
- Connect Input-10 to Pin-1 (Input) of ICBase-1 (74LS10).
- Connect Input-12 to Pin-4 (Input) of ICBase-1 (74LS10).
- Connect Pin-6 (Output) of ICBase-2 (74LS00) to Pin-19 (Input) of ICBase-1 (74LS10).
- Connect Pin-3 (Output) of ICBase-2 (74LS00) to Pin-5 (Input) of ICBase-1 (74LS10).